This project consists of three shows and is controlled via three DMX channels. 


The first DMX channel starts the second show, the second DMX channel starts the first show and the third show is started via the third DMX channel.

The content of the Control.ini file looks like this:



!d2=5!rsn1#

!d1>10!rsn2#

!d3<20!rsn3#



1st line: If the value of DMX channel 2 is equal 5 (!d2=5), then show 1 (001_SHOW.WM1) will start in normal mode (!rsn1).


2nd line: If the value of DMX channel 1 is greater than 10 (!d1>10), then show 2 (002_SHOW.WM1) will start in normal mode (!rsn2).


3rd line: If the value of DMX channel 3 is less than 20 (!d3<20), then show 3 (003_SHOW.WM1) will start in normal mode (!rsn3).