Start a new topic

Pro I/O Firmware - Version 1.85

Download the newest Pro I/O Firmware Here: 


Pro I/O Firmware Update V185


Version 1.87:

 New functions:

 none.

 Fixes:

 Jitter of Dynamixel-Servos 4-8 fixed.


Version 1.87:

 New functions:

 none.

 Fixes:

 Delay for between consecutive UDP send commands.


Version 1.86:

 New functions:

 none

 Fixes:

 fix for DMX fade level (!ddf...#) und set level (!dds...) commands for ProIO implemented

 


Version 1.85:

 New functions:

 DMX fade level (!ddf...#) und set level (!dds...) commands for ProIO implemented

 Fixes:

 none.


Version 1.84:

 New functions:

 none

 Fixes:

 wrong calculation of % value in !dsl...# command fixed.


Version 1.83:

 New functions:

 implementation of TCP network commands.

 Var check only every 5/100 seconds.

 !emk command allows now x-entries.

 Fixes:

 none.


Version 1.82:

 New functions:

 Supports ProIO Analog -/+10V.

 Fixes:

 none.


Version 1.81:

 New functions:

 DMXMin/Max implemented. With !sdn1=20# and !sdx1=200# you can set a min and a max level for DMX channels.

 Implementing the !sim...# command to allow simultanuosly setting of IP and mask.

 Implementing !??# command for reading query info in one string.

 Fixes:

 none.


Version 1.80:

 New functions:

 Artnet universe is now related to ProIO sub-address (A1, A2,...)

 Fixes:

 none.


Version 1.79:

 New functions:

 !gan1# and gax1# commands work now for ProIO Servo.

 Fixes:

 none.


Version 1.77:

 New functions:

 none.

 Fixes:

 Reboot-loop with USB-connection during power up fixed.


Version 1.76:

 New functions:

 Implementing of unreached IP addresses.

 !cls# deletes a loaded script in ProIO Remote.

 Fixes:

 Change in Network management.

 Script can be loaded, even, if other cues are coming in.



Version 1.74:

 New functions:

 none.

 Fixes:

 Longer wait between EEProm write and next EEProm read.

 If write procedure was not finished, a wrong value will come back.



Version 1.73:

 New functions:

 none.

 Fixes:

 Correction of write pointer of network chip, if a timeout occures.


Version 1.72:

 New functions:

 none.

 Fixes:

 Wrong handling of modulo function in realtime clock scheduler fixed.


Version 1.71:

 New functions:

 At network watchdog timeout, watchdog-show is not cleared any more.

 Fixes:

 none


Version 1.69:

 New functions:

 For ProIO Remote: A range of variables can be modified at once. E.g.: !vmc1_5=2#

 Fixes:

 none


Version 1.68:

 New functions:

 none

 Fixes:

 For ProIO Remote:

 VM analog cues made a wrong fetch of IP-Address from ProIO lookup table.

 Wrong feedback display of !sip...# command fixed.


Version 1.66:

 New functions:

 none

 Fixes:

 !gva# created a memory conflict.


Version 1.63:

 New functions:

 !gls# command reads back loaded script of ProIO Remote.

 Fixes:

 none.


Version 1.61:

 New functions:

 RTCC clock conditions for ProIO Remote enabled.

 Fixes:

 Variable conditions checked after power on.


Version 1.60:

 New functions:

 Network-Bootloader with autoreset on update failure.

 Fixes:

 none.


Version 1.59:

 New functions:

 Keymask for ProIO Remote implemented.

 New command !oci0/1# disabling or enabling ip-cues to ProIO devices.

 Fixes:

 none.


Version 1.58:

 New functions:

 none.

 Fixes:

 Wrong address calculation for !edf..# commands for ProI/O devices fixed.


Version 1.57:

 New functions:

 none.

 Fixes:

 Min- max setting for ProIO Servo enabled.


Version 1.56:

 New functions:

 none.

 Fixes:

 Addressing of channel-mask for digital channels was wrong.


Version 1.55:

 New functions:

 Get variable content and get sub-id command included.

 Fixes:

 none.


Version 1.54:

 New functions:

 Get variable content and get sub-id command included.

 Fixes:

 none.


Version 1.52:

 New functions:

 none.

 Fixes:

 Analog cues have been mapped to a wrong address range.


Version 1.52:

 New functions:

 VenueMagic support for more DMX universes.

 Fixes:

 none.


Version 1.51:

 New functions:

 DMX-mapping is possible now for via WEM-NET connected ProIO devices.

 Command for activating ProIO-Mapping in ProCommander:

 !dmd1:20# ProIO Digital with sub-id A1 is mapped to DMX channel 20.

 !dma2:60# ProIO Analog with sub-id A2 is mapped to DMX channel 60.


 TCP-Bootloader implemented.


 Fixes:

 none.


Version 1.50:

 New functions:

 Allow ProIO Remote to be second source in Wem-Net.

 Fixes:

 none.


Version 1.49:

 New functions:

 ProIO Remote hands through analog cues.

 Fixes:

 none.


Version 1.48:

 New functions:

 Change of ->| sign display for incoming cues. Shows up now, if the cue is for that device.

 Fixes:

 Feedback string for display of digital mask is correct now.


Version 1.47:

 New functions:

 none.

 Fixes:

 Only for ProIO-Remote: different input pins for V102 and V101.


Version 1.46:

 New functions:

 Enabling .ini file load for ProIO-Remote via network.

 Fixes:

 Serial commands didn't work.


Version 1.45:

 New functions:

 Internal changes.

 Fixes:

 none.


Version 1.44:

 New functions:

 Enabling of multiple DMX universe via WEM-NET.

 Fixes:

 none.


Version 1.43:

 New functions:

 Additional diasy chain baud rates: 400000 and 500000 baud.

 With !gdb# you can ask for the current daisy chain baud rate.

 Fixes:

 Servo output 6 and 8 didn't work.


Version 1.42:

 New functions:

 DMX read in enabled.

 Fixes:

 unified strings for DMX map settings.


Version 1.41:

 New functions:

 None.

 Fixes:

 IP-commands have been ignored, if they came in a certain order with a certain time gap.


Version 1.40:

 New functions:

 None.

 Fixes:

 ProIO Remote is working now.


Version 1.38:

 New functions:

 None.

 Fixes:

 !sdb1:....# (Set Daisy Chain Baudrate) command was not sent via network to ProIO devices.

 parameter of wrong serial port has been changed with !scc1:...# command.


Version 1.37:

 New functions:

 New analog level set command for VenueMagic.

 Increasing possible baud rate for WEM-NET to 250kB.

 New Bootloader version. Update via USB and PROIO_UPD.BAT recommended. Both USB driver must be installed!


 Fixes:

 None.


Version 1.36:

 New functions:

 IAAPA-version.

 New ProIO devices implemented: ProIO-Remote, ProIO-Relay, ProIO-Servo.

 New ASCII commands for ProIO devices implemented.


 Fixes:

 None.


Version 1.31:

 New functions:

 Implementing of command !esa (execute-send-all).

 With this command an ASCII command can be sent to all network devices.

 E.g.: !esa:!ees1=0000000000000000# -> sends the command !ees1=0000000000000000# to all network devices.

 

 Fixes:

 None.


Version 1.32:

 New functions:

 Implementing of command !eao (execute-all-off).

 This command switch off all outputs of each device.

 Analog channels fade out with the currently stored Ease-In-Time.


 Art-Net support for Pro-I/O Digital and Pro-I/O Analog.

 

 Fixes:

 Digital Mask is now considered in executing the ASCII-commands !ess, !eos and !eas.


Version 1.33:

 New functions:


 Fixes:

 DIO32 comatible mode for ProIO for Conductor Pro Shows.

 Wrong address calculation for analog channels (affects only the ProIO-Analog)


Version 1.34:

 New functions:


 Fixes:

 If ProIO-Analog device was set to A0, channel 8 could not be addressed via VenueMagic


Login or Signup to post a comment